Decawave DWM1001
| board ID | radio | OS support | deployment |
|---|---|---|---|
| dwm1001 | BLE UWB | RIOT Zephyr | Lille 14 Saclay 10 |
The dwm1001 board corresponds to the
Decawave DWM1001-DEV board. It
runs on an nRF52832 ARM CortexM4 microcontroller from Nordic with BLE and UWB (Ultra-Wide Band) radio
support.
The dwm1001 board can reset, debug and program the ARM Cortex M4
through the embedded debugger (JLink) connected to the gateway USB port. This
component also allows a UART connection to the M4.
IoT-LAB special configuration
The serial connection baudrate should be configured at 115200 bauds in the firmware and use UART0 on pin 11 (RX) and 5 (TX).
Schematics and Datasheets
The hardware configuration is available here.
The board is running on an nrf52832 microcontroller.