Saclay
On the Saclay site, the nodes are deployed at Inria Saclay – Île-de-France, where they are spread across the basement and 2 rooms. Saclay site offers the most heterogeneous deployment, usefull for multi radio and interoperability scenarios.
server saclay.iot-lab.info
boards
Arduino Zero
3
BBC micro:bit
1
Decawave DWM1001
10
IoT-LAB A8-M3
155
IoT-LAB M3
12
LoRa gateway
1
Microchip SAMR21
15
Microchip SAMR30
3
Nordic nRF51DK
5
Nordic nRF52840DK
10
Nordic nRF52DK
10
nRF52832-MDK
1
nRF52840-MDK
1
NXP FRDM-KW41Z
5
Phytec PhyNODE-KW2X
1
Pycom
5
RTL SDR
3
ST B-L072Z-LRWAN1
25
ST B-L475E-IOT01A
10
Topology
The platform is distributed over the basement of the building and 2 rooms.
Basement
The basement is 1250 m2 (41.5 m x 30 m). Nodes are deployed on the cable trays hanging from the ceiling. It contains the following boards:
| Board type | Board id | Count | Radio(s) | Other location |
| A8 | a8 | 115 | 802.15.4 | Room 1 (18), Room 2 (30) |
| SAMR30 Xplained Pro | samr30 | 3 | Sub-GHz | |
| ST B-L475E-IOT01 | st-iotnode | 10 | BLE + WiFi + Sub-GHz |
Room 1
The room 1 is 144 m2 (12 m x 12 m) and contains the following boards:
| Board type | Board id | Count | Radio(s) | Other location |
| A8 | a8 | 18 | 802.15.4 | Basement (115), Room 2 (30) |
| ST B-L072Z-LRWAN1 | st-lrwan1 | 25 | LoRa | |
| nRF52DK | nrf52dk | 10 | BLE | |
| nRF52840DK | nrf52840dk | 5 | 802.15.4 + BLE | Room 2 (5) |
| nRF51DK | nrf51dk | 5 | BLE | |
| micro:bit | microbit | 1 | BLE |
Room 2
The room 2 is 48 m2 (12 m x 4 m) and contains the following boards:
| Board type | Board id | Count | Radio(s) | Other location |
| A8 | a8 | 30 | 802.15.4 | Basement (115), Room 1 (18) |
| M3 | m3 | 12 | 802.15.4 | |
| SAMR21 Xplained Pro | samr21 | 15 | 802.15.4 | |
| Arduino Zero | arduino-zero | 3 | 802.15.4 (XBee) | |
| nRF52840DK | nrf52840dk | 5 | 802.15.4 + BLE | Room 1 (5) |
| NXP FRDM-KW41Z | frdm-kw41z | 5 | 802.15.4 + BLE | |
| nRF52840-MDK | nrf52840mdk | 1 | 802.15.4 + BLE | |
| phyNode | phynode | 1 | 802.15.4 |
Pictures
GPS
TODO
Ground floor rooms 1 and 2 are equipped with a set of GPS repeaters that are relaying the GPS signal indoor.
Live camera
You can follow your experiment live on the A8 node with identifier 145 here.