ST B-L072Z-LRWAN1
| board ID | radio | OS support | deployment |
|---|---|---|---|
| st-lrwan1 | LoRa | RIOT Contiki-NG Zephyr | Lille 5 Saclay 25 |
The B-L072Z-LRWAN1 board is LoRa capable board running on ab ARM CortexM0+ STM32L072CZ microcontroller.
It is possible to reset, debug and program the ARM Cortex M0 through the embedded debugger (ST-LINK) connected to the gateway USB port. This component also allows a UART connection to the M0.
IoT-LAB special configuration
The serial connection baudrate should be configured at 115200 bauds in the
firmware and use USART2 on pins PA3 (RX) and PA2 (TX).
Schematics and Datasheets
The board datasheet is available here.
The cpu datasheet is available here.
Sensors extension
Nodes in Saclay site (st-lrwan1-1 to st-lrwan1-25) are equipped with the ST X-NUCLEO-IKS01A2 shield. This gives access to external sensors to the nodes: